The maximum inclination angle of the belt conveyor may vary from manufacturer to manufacturer, but is generally around 20-30 degrees. The specific value needs to be provided according to the device model and manufacturer. It should be noted that the maximum inclination angle of the belt conveyor depends not only on the performance of the equipment itself, but also on the nature of the material being conveyed. For some brittle materials, such as coal mines, limestone, etc., a lower inclination angle may cause the materials to break. For some materials with higher hardness, such as steel, aluminum, etc., a larger inclination angle can be used.
In addition, the maximum inclination angle of the belt conveyor also depends on the structure of the belt. The structure of the belt is different, and its maximum inclination angle will also be different. For example, the structure of the multi-layer belt can increase the strength of the belt, so its maximum inclination angle may be larger. On the contrary, the single-layer belt structure cannot improve the strength, so its maximum inclination angle may be smaller. The maximum inclination angle of the belt conveyor is mainly determined by the nature of the material, the belt structure and the structure of the equipment itself.
It should be noted that a larger inclination angle will increase the difficulty of belt conveyor operation, lead to belt wear and prolong the maintenance cycle, and increase energy consumption. In practical applications, generally according to material properties, production efficiency and economic Cost to determine the maximum inclination angle of the belt conveyor.
In addition, the inclination angle of the belt conveyor will also affect the conveying speed of the material. As the inclination angle increases, the conveying speed will slow down. This is because the increase in the inclination angle will increase the friction of the material and reduce the gravity of the material, so that The difficulty of material sliding on the belt conveyor increases. Therefore, when designing the belt conveyor, it is necessary to fully consider the influence of the inclination angle on the material conveying speed, so as to ensure that the material can be transported to the destination within the required time.
The inclination angle of the belt conveyor will also affect the conveying volume of the material. When the inclination angle increases, the difficulty for the material to slide on the belt conveyor increases, and the friction force increases, which hinders the movement of the material on the belt conveyor, thus Reduce the conveying volume of materials. When the inclination angle decreases, the difficulty for materials to slide on the belt conveyor is reduced, and the friction force is reduced, which makes the movement of materials on the belt conveyor more smooth, thereby increasing the conveying volume of materials .
Generally speaking, the inclination angle of the belt conveyor is an important factor affecting the efficiency of material conveying. It is necessary to comprehensively consider the material properties, production efficiency, economic cost and other factors to determine the inclination angle of the belt conveyor to ensure that the material can be transported efficiently and safely. delivery.
Post time: Jan-16-2023